Allan Piso WiFi: Login, 10.0.0.1, Pause Time, Setup, Parts & Troubleshooting

Allan Piso WiFi can refer to a complete coin-operated WiFi vending machine, an Allan coinslot, a main or custom board, a timer, or other components used to build and operate a Piso WiFi system in the Philippines.

The important point is that Allan hardware and Piso WiFi software are not always the same thing. An Allan-based setup can use different controllers, boards, routers, and software platforms, so features such as the admin interface, 10.0.0.1 portal, pause time, vouchers, and firmware depend on the actual configuration.

What Do You Need Help With?

• Connect or log in: see the Allan Piso WiFi login and 10.0.0.1 section below.
• Pause your session: go to Allan Piso WiFi pause time.
• Manage a machine: use the admin and setup sections.
• Forgot a password: see password and reset.
• Build or repair one: see hardware, parts, and wiring.
• Identify a board or coinslot: check the model reference.
• Something is not working: jump to troubleshooting.

Allan Piso WiFi at a Glance

Attribute	What it means
Main entity	Allan Piso WiFi
Category	Piso WiFi and vending hardware ecosystem
Main market	Philippines
Common forms	Complete vendo, coinslot, main board, custom board, timer and accessories
Payment	Coins and/or vouchers, depending on the setup
Internet	Requires an upstream internet connection
Local access	Often uses a local gateway such as 10.0.0.1, depending on the configuration
Customer access	Captive portal/session interface
Admin access	Management interface controlled by the installed system
Pause Time	Depends on the software/platform and configuration
Hardware	Modular; individual components can be replaced or upgraded
Typical uses	Piso WiFi, Pisonet/vending applications, DIY builds, repair and upgrades

Current marketplace results show that the Allan ecosystem includes separate coinslots, main boards, custom boards, timers, LED frames, cooling fans, wiring and networking parts rather than one single fixed product.

What Is Allan Piso WiFi?

Allan Piso WiFi is best understood as an Allan-branded hardware ecosystem used in coin-operated and prepaid internet vending systems.

When someone searches for “Allan Piso WiFi,” they may be referring to several different things. The broader category is covered on Piso WiFi and Piso WiFi machine.

Complete Allan Piso WiFi Vendo

A ready-made machine can combine the enclosure, coinslot, controller hardware, networking equipment, power components and software configuration into one unit. This is the simplest option for an operator who does not want to assemble the hardware from individual parts.

Allan Coinslot

The coinslot is the payment-input hardware. It detects an accepted coin and sends an input or pulse to the controller or timer that determines what happens next.

Current listings include Allan 1238/1238A, 1239/1239A and Pro Max variants, with some listings specifically advertising old/new coin compatibility and anti-hooking designs. These features are model-specific rather than universal to every Allan coinslot.

Allan Main or Custom Board

An Allan system may also contain a controller or single-board-computer-related component that handles the software and vending logic.

A current Allan main-board listing describes a 1GB H3 quad-core board with Android, Ubuntu and Debian support. Because this is a marketplace specification, it should be treated as a seller-listed specification rather than a universal specification for every Allan board revision.

Allan Timer

Separate Allan timer products are also sold for Piso WiFi/Pisonet and other vending applications. Current listings include the 1203 and 1222 four-digit timer families.

Supporting Components

The wider Allan ecosystem also includes LED coin-slot frames, cooling fans, power supplies, DC connectors, network cables, RJ45 components, wiring, enclosures, and other vending-machine parts.

Complete Allan Vendo vs DIY Allan Build

The main difference is how much of the hardware is already assembled. A ready-made package is also different from a standalone Allan coinslot.

Complete Vendo	DIY Build
Preassembled	Components selected separately
Enclosure normally included	Enclosure chosen separately
Wiring largely completed	Wiring required
Faster installation	More customization
Easier for beginners	Better for experienced builders
Fewer compatibility decisions	More compatibility decisions

Which Allan Piso WiFi Setup Do You Have?

Before following a guide, identify what you actually own.

You Have a Complete Vendo Machine

Focus on internet connection, router/access point, portal, customer login, rates, payment, vouchers, pause time, and admin settings.

You Have an Allan Coinslot

Focus on model number, coin compatibility, sensor, wiring, controller/timer compatibility, and coin detection.

You Have an Allan Main Board

Focus on board revision, processor/RAM specifications, storage, operating system, firmware, power, network connections, and compatibility with the rest of the system.

You Have an Allan Custom Board

The exact board matters because custom boards can sit between the coinslot, timer and single-board computer.

You Have an Allan Timer

Identify the model, such as 1203 or 1222, before assuming its coin or wiring configuration.

Customer or Admin? Choose the Correct Access

One of the most common sources of confusion is treating every login as the same login.

Customer Access

A customer normally wants to connect to the Piso WiFi network, open the captive portal, pay or enter a voucher, start a session, see the remaining time, and pause or resume when the feature is available.

Operator/Admin Access

An operator may need to configure rates, manage sessions, configure vouchers, control bandwidth, manage users, enable or disable features, update software or firmware, troubleshoot the network, and reboot or reset equipment.

Router Management Is Not Always the Same as Piso WiFi Management

The underlying router can have its own administration interface, while the Piso WiFi software can have a separate portal and management layer. Identify the router, controller and software platform before following a login guide.

How Allan Piso WiFi Uses 10.0.0.1

10.0.0.1 is a commonly used local gateway address in Piso WiFi environments, but it should not be treated as an Allan-only property.

The relationship is better understood like this:

Allan hardware → controller/software → local network → gateway/portal → 10.0.0.1

Philippine Piso WiFi router documentation, including TP-Link’s local Piso WiFi notes, describes 10.0.0.1 as a commonly used gateway for accessing management settings. Depending on the hardware and configuration, another local gateway may be used instead. The general guide is 10.0.0.1 login.

What Can Be Associated with the 10.0.0.1 Interface?

Depending on the system, the management environment may provide access to session settings, bandwidth settings, connected devices, network configuration, security settings, payment/session configuration, and reboot and reset controls.

How to Open 10.0.0.1

1. Connect your phone, laptop or computer to the correct Piso WiFi network.
2. Open Chrome, Safari or another browser.
3. Enter http://10.0.0.1 in the address bar, not Google Search.
4. Open the available portal or login screen.
5. Use the appropriate customer or administrator access.

A router can use a different local address, such as 192.168.1.1, so do not assume 10.0.0.1 is universal. For gateway discovery, use the gateway checker.

If 10.0.0.1 Does Not Open

1. Are you connected to the Allan/Piso WiFi network?
2. Is mobile data interfering with the connection?
3. Is 10.0.0.1 actually the gateway of that installation?
4. Does another browser or private/incognito mode work?
5. Is the router/controller powered?
6. Has the machine’s network configuration changed?

Do not reset the machine immediately. A factory reset can erase working configuration. If the portal itself fails, see Piso WiFi not working.

Allan Piso WiFi Login

How Customers Connect

The normal customer flow is:

1. Connect your phone to the Piso WiFi network.
2. Open a browser.
3. Wait for the portal or open the local gateway manually.
4. Follow the payment or voucher instructions.
5. Start the session.
6. Confirm that the timer/session has started.

The exact screen depends on the Piso WiFi software installed on the machine. The usual path is connection, then http://10.0.0.1, then payment or voucher, then an active session.

Allan Piso WiFi Admin Login

Admin access is different from customer access. The username, password, URL, menu names, and settings depend on the installed platform and hardware configuration. Do not use a supposed “universal Allan password” unless the exact system documentation confirms it.

Login on Android

1. Connect to the Allan/Piso WiFi network.
2. Open Chrome.
3. Enter the local portal address if automatic redirection does not appear.
4. Complete payment or voucher authentication.
5. Use the customer portal normally.

If the portal does not appear, try opening the gateway manually and temporarily disabling mobile data.

Login on iPhone

1. Open WiFi settings.
2. Connect to the vending network.
3. Open Safari.
4. Open the local portal/gateway.
5. Complete the session setup.

Login Page Does Not Appear

The problem may be captive portal redirect failure, browser cache, an incorrect gateway, a disconnected network, a router/controller problem, or mobile-data fallback. Fix the network connection first before treating it as an Allan login problem.

Allan Piso WiFi Password and Reset

“Password” can refer to several different things.

Credential	Purpose
WiFi password	Connect to the wireless network
Admin password	Manage the Piso WiFi system
Router password	Manage the underlying router
Voucher/code	Start or authenticate a paid session

These credentials should not be mixed together.

Changing an Admin Password

If you have administrator access, use the installed software’s account/security settings to change the password. Use a unique password rather than keeping a publicly documented default.

Forgot the Admin Password?

First identify the platform and device. Then check the seller/manual documentation, the router label, the software documentation, and your saved administrator credentials.

If the credentials are genuinely lost, a reset may be necessary, but understand what configuration could be erased before doing it. The broader reset process is on 10.0.0.1 password reset when that gateway is the one in use.

Allan Piso WiFi Pause Time

Pause Time is a software/session feature, not something automatically provided by every piece of Allan hardware. The exact pause behavior depends on the Piso WiFi software and its configuration. Full steps live on Piso WiFi pause time.

Current Philippine router guidance describes Pause Time as a session-control feature that freezes the remaining prepaid time while the session is paused, with the administrator controlling whether it is available and how it behaves.

How Pause Time Works

Paid session → timer running → Pause → session suspended → remaining time retained → Resume

When supported, the system keeps the session information while the active internet session is suspended. The exact mechanism used to identify the session can vary by platform.

How to Pause

1. Connect to the Piso WiFi network.
2. Open the customer portal.
3. Start your paid session.
4. Find Pause, Pause Time or a similar control.
5. Tap the button.
6. Confirm that the countdown has stopped.

How to Resume

1. Reconnect to the same Piso WiFi network.
2. Open the portal.
3. Return to your existing session.
4. Tap Resume if the platform provides that control.

Using the same device is generally safer because some Piso WiFi systems associate sessions with device/network identifiers.

Why Is the Pause Button Missing?

• The operator disabled Pause Time.
• The installed software does not support it.
• The feature is not enabled in the current configuration.
• The portal is not displaying the current session correctly.

A customer cannot normally activate a disabled admin feature from the customer portal.

Pause Time Not Working

1. Is the session still active?
2. Does the portal show a Pause button?
3. Are you using the same phone/device?
4. Did the pause limit expire?
5. Can you still reach the portal?
6. Is the machine using firmware/software that supports the feature?

Fix portal access first if 10.0.0.1 itself is unavailable. A remaining-time estimate is on the pause time helper.

Android and iPhone

The core process is browser-based on systems that expose the pause function through the customer portal. The important factor is not Android versus iPhone alone; it is whether the particular Piso WiFi system supports Pause Time and can correctly associate the device/session.

Can You Resume on Another Device?

Not reliably across all systems. Some platforms match a session to device/network information rather than a simple user account. Changing devices or network identifiers can prevent the original session from being recovered.

How Long Can You Stay Paused?

There is no single Allan-wide value. Pause behavior depends on the installed software and administrator settings. Platform differences, including LPB and AdoPiSoft pause limits, are covered on the pause guide. Check the actual machine’s pause rules rather than assuming a universal timeout.

Voucher, Promo and Session Time

Allan-based machines can use coin-based payment, voucher-based access, or other payment methods depending on the software and hardware configuration. Voucher steps are on Piso WiFi voucher code.

How a Voucher Session Works

Voucher/payment → authentication → package/rate → session → timer → internet access

The package may define duration, access rules, speed/bandwidth, expiry, and other operator-controlled limits.

Coin Payment vs Voucher

A coin-operated setup accepts the configured denomination and converts the payment into a service package. A voucher system lets the operator create or distribute predefined access codes. The exact relationship between the coin input, timer and software depends on the build.

Allan Piso WiFi Promo

“Promo” normally refers to the package/rate configured by the operator rather than a single universal Allan promotion. An operator might configure different packages for different coin amounts or voucher types. Do not treat one rate such as “₱1 = X minutes” as a universal Allan rule. The operator controls the pricing configuration.

How Allan Piso WiFi Works Internally

Separate the hardware, network and software layers.

Internet
↓
Modem / Router
↓
WiFi / LAN
↓
Allan main or custom controller
↓
Piso WiFi software
↓
Customer portal
↓
10.0.0.1 / local gateway
↓
Customer phone or laptop

At the payment side:

Coin
↓
Coinslot / selector
↓
Coin sensor
↓
Controller / timer
↓
Rate or package
↓
Session created
↓
Internet time

A failed session does not always mean the same component has failed. A coin may be detected correctly while the software session fails. The portal may work while the upstream internet connection is down. The router may work while the coinslot sensor is faulty.

Allan Piso WiFi Hardware and Parts

Allan Coinslot

The coinslot is the physical payment-input component. Depending on the model, it may contain or connect to a coin selector, sensor, pulse/output connection, anti-hooking mechanism, LED frame, and wiring.

Current Philippine marketplace listings show separate Allan 1238/1238A, 1239/1239A and 1299 Pro Max families. Some listings specifically advertise old/new coin support and anti-hooking. Treat those as model-specific characteristics.

Allan 1238 / 1238A are part of the Allan universal coinslot family seen in current listings.

Allan 1239 / 1239A: current listings describe 1239A variants as multi-coin selectors, with some listings advertising support for old and new Philippine coins.

Allan 1239 Pro Max: current marketplace listings identify the 1239A Pro Max as a multi-coin Piso WiFi coinslot. One current listing advertises support for old and new ₱1–₱20 coins. Check the exact seller and model revision before purchase.

Allan 1299 Pro Max: the product ecosystem also contains 1299 Pro Max coinslot listings with LED and anti-hooking descriptions.

Allan Main Board

Current marketplace listings describe an Allan Piso WiFi main board as a 1GB H3 quad-core single-board-computer-style product, with Android, Ubuntu and Debian mentioned in the product specification. That is a seller-listed spec, not a guarantee for every revision.

The main board’s practical role is to provide computing/control for the Piso WiFi software and associated hardware. Before buying a replacement board, verify the exact model, board revision, processor/RAM specification, storage/boot method, power requirements, network interfaces, software compatibility, firmware/image compatibility, and connections to the coinslot or custom board.

Do not assume that every Allan-labeled board has identical specifications.

Allan 1213 and 1215 Custom Boards

The Allan ecosystem also includes custom boards intended to connect vending hardware with single-board-computer-based builds. The Allan 1215 is currently listed specifically as a universal custom board for Piso WiFi and Orange Pi One.

This is different from saying that every Allan main board is an Orange Pi. The board, custom interface and single-board computer can be separate components.

Is the Allan Main Board the Same as Orange Pi?

This question has appeared in community discussion because users have noticed similarities between some Allan main-board listings and Orange Pi One hardware and advertised specifications. A public discussion raises questions about similar ports, pins, 1GB memory and Piso WiFi use, and asks whether the Allan board is essentially an alternative Orange Pi. That is a community question, not proof that the two boards are officially identical or firmware-interchangeable.

• Allan sells boards designed for Piso WiFi use.
• Allan also sells a 1215 custom board associated with Orange Pi One.
• Allan 1239 Pro Max hardware appears in Piso WiFi builds that use custom boards and single-board computers.
• The exact relationship between an Allan-branded main board and an Orange Pi One should be verified by the board revision and manufacturer documentation before flashing firmware or substituting hardware.

Do not flash Orange Pi firmware onto an Allan board simply because the boards appear similar.

Allan Timers

A timer can provide a visible time display or participate in the vending control chain, depending on the build.

Allan 1203: a current product listing describes a four-digit timer intended for Piso WiFi/Pisonet and states support for 1, 5 and 10 peso inputs and old/new coins. These are listing-specific claims.

Allan 1222: current listings describe the 1222 as a four-digit timer for Piso WiFi/Pisonet and other vending applications, with versions supporting multiple denominations.

Hardware Timer vs Software Session Timer

Do not automatically assume they are the same. A physical four-digit timer can display or control timing at the hardware level, while the Piso WiFi software may maintain the actual network session, remaining time and pause/resume state.

Other Allan Components

The current Allan product ecosystem also includes RGB LED coin-slot frames, 12V cooling fans, DC power connectors, network cables, RJ45 components, wiring and jumper cables, enclosures and locks, and power components. Match these to the voltage, connector type, board and enclosure being used.

What Software Works With Allan Piso WiFi?

Allan is not the same entity as the Piso WiFi operating system or platform.

Allan hardware → controller/SBC → Piso WiFi software → customer/admin portal

Published Piso WiFi build notes show Allan 1239 Pro Max hardware connected through custom hardware and used with single-board computers and software such as PisoFi. Before installing software, confirm the board, processor architecture, storage format, OS/image, controller, coinslot interface, required peripherals, and firmware compatibility.

PisoFi

PisoFi is one software layer that can be used within Piso WiFi builds. Maker-oriented documentation describes a Raspberry Pi 4B-based Piso WiFi build using PisoFi OS and an Allan 1239 Pro Max coinslot. Confirm that description against the guide you are following before you copy the parts list.

LPB

LPB is another Piso WiFi software/platform. Do not treat LPB as an Allan hardware component. AdoPiSoft is a separate platform as well.

Firmware and OS

Your firmware/OS should match the exact hardware configuration. Avoid flashing an image simply because the processor name looks similar, assuming an Orange Pi image works on every Allan board, replacing a board without checking connectors and power, or updating firmware without knowing how to recover the system.

How to Set Up Allan Piso WiFi

Plug-and-Play Setup

1. Position the vendo machine in a suitable location.
2. Connect the upstream internet source.
3. Connect the router/access point and controller.
4. Connect power.
5. Confirm the WiFi network is visible.
6. Open the configured management interface.
7. Configure the portal and access settings.
8. Configure rates/payment.
9. Test the customer portal.
10. Test a real payment/voucher.
11. Confirm that the session timer works.
12. Test Pause Time if your software supports it.
13. Test the internet connection.
14. Put the machine into normal operation.

General Piso WiFi setup normally involves hardware installation, router/network configuration and software or firmware configuration.

DIY Allan Piso WiFi Setup

Allan coinslot
+ compatible controller/custom board
+ single-board computer or main board
+ storage/software
+ router/access point
+ power
+ internet
+ enclosure
+ wiring

1. Choose compatible components.
2. Wire the coinslot to the correct interface.
3. Connect the board/controller.
4. Prepare the required operating system/software.
5. Connect the router/access point.
6. Configure the local network.
7. Configure rates and payment.
8. Test coin detection.
9. Test session creation.
10. Test the customer portal.
11. Test pause/resume if supported.
12. Test multiple connections.
13. Secure and close the enclosure.

The Allan 1239 Pro Max has documented DIY use with custom boards and Raspberry Pi-based Piso WiFi builds. Treat those builds as examples for that parts list, not as a universal Allan diagram.

What Do You Need to Build One?

Minimum Hardware

• Allan-compatible coinslot
• Controller, main board, or custom board
• Router or access point
• Power supply
• Internet source
• Storage/software
• Cables/wiring
• Enclosure

Optional Hardware

• LED frame
• Timer/display
• Cooling fan
• Receipt printer
• UPS or backup power
• Additional access point
• Mounting/security hardware

The exact bill of materials depends on whether you are buying a complete machine or building one from separate components.

Internet Requirements

Allan hardware does not create internet service by itself. The system needs an upstream connection such as fixed broadband, fiber, cable, LTE, 4G/5G, or another suitable WAN source. Satellite WAN such as Starlink Piso WiFi is a separate choice and still sits upstream of the Allan hardware.

The upstream router/modem provides internet connectivity, while the Piso WiFi system controls how that access is offered to customers. Some 4G/LTE router configurations use a SIM directly in the router.

Choose broadband or LTE/5G based on coverage, stability, data allowance, installation location, expected users, cost, and power availability. Do not assume that LTE is always better than fixed broadband or the reverse.

How Many Users Can It Handle?

There is no single universal Allan user limit. Actual capacity depends on the main board/controller, router/access point, WiFi standard, bandwidth, internet connection, number of concurrent clients, traffic type, speed limits, software configuration, and heat and power stability.

Do not confuse processor capacity with WiFi client capacity or with internet bandwidth. They are different bottlenecks. The number of simultaneous users depends on the board and router in that machine, not on one fixed Allan-wide number.

Allan Piso WiFi Troubleshooting

When an Allan machine stops working, identify which layer has failed before replacing parts.

No Power

Check the wall outlet, power adapter, PSU, DC connector, fuse/protection if present, board power indicator, and router/AP power. Do not replace the main board before confirming the power path.

WiFi Network Is Not Visible

1. Is the router/AP powered?
2. Is the SSID still configured?
3. Is the access point functioning?
4. Is the controller booted?
5. Has the router configuration changed?

Connected to WiFi but 10.0.0.1 Does Not Open

Check the correct WiFi network, mobile data, local gateway, browser cache, another browser, and router/controller status. Also check whether the installation uses a different gateway address before assuming the router is defective.

Login Page Does Not Load

Possible causes include captive portal failure, the wrong gateway, a software issue, a browser/cache issue, network configuration, or controller failure. Try private/incognito browsing and verify the local gateway first.

Internet Does Not Work After Login

Separate whether the local network works, whether the WAN/internet works, and whether the session is authorized. A working WiFi signal does not guarantee that the upstream internet connection is working.

Coin Is Not Detected

Check the correct coin type, coinslot power, coin sensor, wiring, connector, controller input, configuration, and physical obstruction. If the machine accepts the coin mechanically but does not add time, the problem may be further downstream.

Coin Is Detected but No Time Is Added

coinslot → signal → controller → timer/software → session

Do not immediately replace the coinslot.

Voucher Is Not Working

Check voucher spelling, expiry, package validity, portal connection, system time, voucher software/database, and operator configuration.

Pause Time Is Not Working

1. Is Pause Time enabled?
2. Does the software support it?
3. Is the session active?
4. Does the pause button appear?
5. Has the session expired?
6. Are you using the same device?
7. Is the portal accessible?

Disabled pause settings, expired sessions, device matching and portal/network problems are common causes.

Timer Is Not Counting

Determine whether you are looking at a physical Allan timer, a software session timer, or a customer portal countdown. Then inspect the correct layer.

Main Board Will Not Boot

Check power, storage/SD card if used, the correct OS/image, board connections, overheating, and firmware/image compatibility. Do not use a random firmware image simply because another single-board computer appears similar.

Machine Keeps Restarting

Possible causes include unstable power, overheating, faulty storage, a board fault, software/firmware instability, or a failing router. Isolate whether the restarts happen at the board, router or power level.

Machine Becomes Hot

Inspect fan operation, ventilation, dust, enclosure airflow, the power supply, and workload. Overheating and unstable power are common contributors to router instability.

Firmware Update Failed

Do not keep flashing different images. First identify the exact board, current firmware, required image, storage method, and recovery procedure. A firmware update is only an improvement when the new image is compatible with the hardware.

LED Indicators

LED behavior is model-specific. Do not assume that every Allan machine uses the same color meaning. If a manual or exact product listing identifies a particular LED status, follow that model’s documentation. A flashing LED can represent power, network activity, payment status, controller status or an error depending on the component.

Receipt Printer

A receipt printer is an optional component on some vending configurations rather than a requirement for every Allan machine. When troubleshooting a printer, check the USB/serial/network connection, power, paper, printer configuration, software support, driver/interface, and available print templates. A printer problem should not normally be confused with a Piso WiFi network problem.

Maintenance

• Clean the coinslot. Remove dirt, debris and foreign objects that can interfere with coin detection.
• Check wiring. Inspect loose connectors, damaged cables and poor contacts.
• Check power. Voltage instability can cause apparently unrelated problems.
• Check cooling. Keep fans and ventilation paths clean.
• Monitor the network. Watch for frequent disconnects, high device counts, slow speeds, router overheating, and upstream internet failures.
• Keep backups of configuration, credentials, rate settings, voucher data where possible, software images, and board information before changing firmware.

Allan Piso WiFi for Business

Allan-based Piso WiFi systems can be used in sari-sari stores, residential neighborhoods, barangays, dormitories, waiting areas, small commercial locations, and remote areas with suitable connectivity.

An operator should consider the machine or hardware, internet service, electricity, maintenance, replacement parts, cooling, backup power, installation, and software/license costs where applicable. Do not estimate profitability from the machine price alone.

Your actual business result depends on traffic × price per session × usage × uptime − operating costs. For broader planning, see Piso WiFi business and the rate calculator.

Price and Parts Cost

There is no single universal Allan price because buyers can purchase individual components or complete systems.

Recent September 2026 marketplace examples show how widely the parts can vary:

• Allan 1239A coinslot listings around the ₱540–₱580 range
• Allan 1299 Pro Max coinslot listings around the ₱650 range
• Allan 1203 timer listings around ₱500–₱600
• Allan 1222 timer listings around ₱290–₱400
• an Allan 1215 custom board around ₱430–₱450
• an Allan 1GB H3 main-board listing around ₱1,799

These are marketplace examples, not fixed official Allan prices. Listings, sellers, promotions and revisions can change.

A complete machine will cost more because it can include the enclosure, router/AP, controller, coinslot, timer, wiring, power supply, cooling, installation, software, and internet equipment.

Where to Buy Parts

Current search results show Allan products being sold through Philippine online marketplaces and reseller channels, particularly for coinslots, timers, boards, wiring and accessories.

Before purchasing a part, verify the exact model number, board revision, coin compatibility, connector type, power requirements, software compatibility, required firmware, and whether the part is intended for Piso WiFi, Pisonet or another vending application. A product with “Allan” in its title is not automatically interchangeable with every other Allan component.

Allan vs Piso WiFi vs LPB vs PisoFi vs 10.0.0.1

Entity	What it represents
Allan	Hardware/component ecosystem
Piso WiFi	Coin-operated/prepaid internet system and business category
Coinslot	Physical payment-input hardware
Main board	Computing/controller hardware
Custom board	Interface/control hardware used in a particular build
LPB	Piso WiFi software/platform
PisoFi	Piso WiFi software/platform
10.0.0.1	A local gateway/portal address commonly used in some Piso WiFi installations
Voucher	Session/access credential
Pause Time	A session-control function implemented by supported software/configurations

Allan hardware can participate in different software configurations. Published build notes show Allan 1239 Pro Max hardware used in a PisoFi/Raspberry Pi-oriented build.

Models and Component Reference

Allan model/family	Typical role
1238 / 1238A	Coinslot family
1239 / 1239A	Coinslot family
1239A Pro Max	Multi-coin coinslot variant
1299 Pro Max	Coinslot variant
1203	Four-digit timer
1222	Four-digit timer
1213	Custom-board family
1215	Universal/custom board for Piso WiFi and Orange Pi-related builds
H3 / 1GB main-board listings	Main-board/single-board-computer class hardware

Model names and specifications can vary by listing and revision, so identify the actual hardware before using a replacement or firmware image.

Allan Piso WiFi FAQs

What is Allan Piso WiFi?

Allan Piso WiFi refers to Allan-branded hardware and components used in Piso WiFi vending systems. Depending on the context, it can mean a complete vendo machine, coinslot, main board, custom board, timer or related component.

Is Allan Piso WiFi a machine or a board?

It can refer to either. “Allan Piso WiFi” is broad enough to describe a complete system or individual Allan components used within that system.

How do I log in to Allan Piso WiFi?

Connect to the correct Piso WiFi network and open the configured local portal, commonly through 10.0.0.1 where that address is used. Customer and admin access are different.

What is the Allan Piso WiFi 10.0.0.1 address?

10.0.0.1 is a local gateway address commonly used in Piso WiFi systems. It is not uniquely an Allan address, and some installations can use a different gateway.

What is the Allan Piso WiFi admin login?

There is no safe universal Allan admin credential that applies to every hardware/software combination. Identify the platform and exact machine configuration first.

What is the Allan Piso WiFi password?

It depends on which password you mean: WiFi, admin, router or voucher. These should be treated as separate credentials.

How do I reset Allan Piso WiFi?

Use the reset procedure appropriate to the underlying router/software. A factory reset may erase existing settings, so back up configuration and identify the hardware before resetting.

How do I pause Allan Piso WiFi?

If the installed software supports Pause Time and the operator has enabled it, open the customer portal and use the Pause/Pause Time control. The exact behavior and limits depend on the software configuration.

Why is Allan Piso WiFi pause not working?

Possible causes include disabled Pause Time, unsupported firmware/software, an expired session, portal problems or device/session matching issues.

Can I use Allan Piso WiFi on Android or iPhone?

Yes, where the system provides a browser-based customer portal. Connect to the machine’s WiFi and open the portal in Chrome or Safari.

What is the Allan 1239A and 1239 Pro Max?

The 1239A is an Allan coinslot model/family sold for Piso WiFi and related vending applications. Current listings describe some 1239A variants as multi-coin selectors. The 1239 Pro Max is a Pro Max variant advertised for multi-coin Piso WiFi use. Confirm the exact listing before you buy.

What are the Allan 1203 and 1222 timers?

They are four-digit Allan timer families listed for Piso WiFi/Pisonet and other vending applications. Exact supported denominations should be verified for the specific model.

What is the Allan 1215?

The Allan 1215 is currently listed as a universal custom board for Piso WiFi and Orange Pi One-related builds.

Is the Allan main board the same as Orange Pi?

Community discussion is not enough to establish that every Allan main board is an Orange Pi or that the firmware is interchangeable. Check the hardware revision and manufacturer documentation before substitution.

What software can run with Allan hardware?

The exact software depends on the build. Allan hardware has been documented in Piso WiFi builds involving platforms such as PisoFi, while other configurations can use different software such as LPB.

Does Allan Piso WiFi need internet?

Yes. The Allan hardware does not create upstream internet service by itself. The system needs a suitable WAN connection such as broadband, fiber, LTE or another compatible source.

How many users can Allan Piso WiFi support?

There is no universal Allan number. Capacity depends on the controller, router/AP, bandwidth, software settings, WiFi environment and concurrent workload.

What should I do if 10.0.0.1 does not open?

Make sure you are connected to the correct network, check the actual gateway address, try another browser/private mode and verify that the router/controller is powered. Some systems use a different gateway.

Why is my Allan coinslot not detecting coins?

Check the exact coin model, power, sensor, wiring, connector and controller input. If the physical coinslot accepts the coin but the session does not receive time, investigate the controller/software side too.

How much does Allan Piso WiFi cost?

There is no single universal price. Individual parts and complete machines are sold separately, and current marketplace prices vary by model, seller and promotion.

Final Takeaway

Allan Piso WiFi is easiest to understand when you stop treating it as one product and instead look at the complete system:

Allan hardware → payment hardware → controller/board → software → network → 10.0.0.1 → customer session

The coinslot handles the payment input. The controller and software determine how that input becomes a session. The router and access point provide the network layer. The portal manages customer access, while the admin interface controls the system.

For customers, the most important tasks are usually connect, login, pay, voucher, pause and resume. For operators, the important areas are hardware selection, board/software compatibility, rates, vouchers, bandwidth, firmware, maintenance and troubleshooting. For builders, the most important relationship is compatibility between the coinslot, custom/main board, timer, router, power system and software.

For anyone buying replacement parts, identify the exact Allan model and hardware revision first. The 1238/1239/1299 coinslots, 1203/1222 timers, 1213/1215 custom boards and Allan main-board listings are different product entities rather than interchangeable names.